Algorithm transformation methods to reduce the overhead of software-based fault tolerance techniques

This paper introduces a framework that tackles the costs in area and energy consumed by methodologies like spatial or temporal redundancy with a different approach: given an algorithm, we find a transformation in which part of the computation involved is transformed into memory accesses. The precomputed data stored in memory can be protected then by applying traditional and well established ECC algorithms to provide fault tolerant hardware designs. At the same time, the transformation increases the performance of the system by reducing its execution time, which is then used by customized software-based fault tolerant techniques to protect the system without any degradation when compared to its original form. Application of this technique to key algorithms in a MP3 player, combined with a fault injection campaign, show that this approach increases fault tolerance up to 92%, without any performance degradation.     

Experimental analyses of the poly(vinyl chloride) foams' mechanical anisotropic behavior

Assessing a full set of mechanical properties is a rather complicate task in the case of foams, especially if material models must be calibrated with these results. Many issues, for example anisotropy and heterogeneity, influence the mechanical behavior. This article shows through experimental analyses how the microstructure affects different experimental setups and it also quantifies the degree of anisotropy of a poly(vinyl chloride) foam. Monotonic and cyclic experimental tests were carried out using standard compression specimens and non‐standard tensile specimens. Results are complemented and compared with the aid of a digital image correlation technique and scanning electron microscopy analyses. Mechanical properties (e.g., elastic and plastic Poisson's ratios) are evaluated for compression and tensile tests, for two different material directions (normal and in‐plane). The material is found to be transversely isotropic. Differences in the results of the mechanical properties can be as high as 100%, or even more depending on the technique used and the loading direction. Also, the experimental analyses show how the material's microstructure behavior, like the evolution of the herein identified “yield fronts” and a “spring back” phenomenon, can influence the phenomenological response and the failure mechanisms as well as the hardening curves. POLYM. ENG. SCI., 2012. © 2012 Society of Plastics Engineers     

An Analysis of Public Clouds Elasticity in the Execution of Scientific Applications: a Survey

Elasticity can be seen as the ability of a system to increase or decrease the computing resources allocated in a dynamic and on demand way. It is an important feature provided by cloud computing, that has been widely used in web applications and is also gaining attention in the scientific community. Considering the possibilities of using elasticity in this context, a question arises: “Are the available public cloud solutions suitable to provide elasticity to scientific applications?” To answer the question, in a first moment we present a survey on the use of cloud computing in scientific scenarios, providing an overview of the subject. Next, we describe the elasticity mechanisms offered by major public cloud providers and analyzes the limitations of the solutions in providing elasticity for scientific applications. As the main contribution of the article, we also present an analysis over some initiatives that are being developed to overcome the current challenges. In our opinion, current computational clouds are developing rapidly but have not yet reached the necessary maturity level to meet all scientific applications elasticity requirements. We expect that in the coming years the efforts being taken by numerous researchers in this area identify and address these challenges and lead to better and more mature technologies that will improve cloud computing practices.     

Mathematical Modeling of Weld Bead Geometry, Quality, and Productivity for Stainless Steel Claddings Deposited by FCAW

In recent years, industrial settings are seeing a rise in the use of stainless steel claddings. The anti-corrosive surfaces are made from low cost materials such as carbon steel or low alloy steels. To ensure the final quality of claddings, however, it is important to know how the welding parameters affect the process??s outcome. Beads should be defect free and deposited with the desired geometry, with efficiency, and with a minimal waste of material. The objective of this study then is to analyze how the flux-cored arc welding (FCAW) parameters influence geometry, productivity, and the surface quality of the stainless steel claddings. It examines AISI 1020 carbon steel cladded with 316L stainless steel. Geometry was analyzed in terms of bead width, penetration, reinforcement, and dilution. Productivity was analyzed according to deposition rate and process yield, and surface quality according to surface appearance and slag formation. The FCAW parameters chosen included the wire feed rate, voltage, welding speed, and contact-tip-workpiece distance. To analyze the parameters?? influences, mathematical models were developed based on response surface methodology. The results show that all parameters were significant. The degrees of importance among them varied according to the responses of interest. What also proved to be significant was the interaction between parameters. It was found that the combined effect of two parameters significantly affected a response; even when taken individually, the two might produce little effect. Finally, the development of Pareto frontiers confirmed the existence of conflicts of interest in this process, suggesting the application of multi-objective optimization techniques to the sequence of this study.     

Building a bridge between performance management,radical innovation,and innovation networks: A systematic literature review

Research on performance management (PM) of networks and radical innovation has largely developed along two isolated paths. On the one hand, a growing body of knowledge addresses the use of performance management systems in the context of networks (notably for production and incremental innovation). On the other hand, radical innovation scholars have shown how innovation initiatives that are more uncertain demand the use of new approaches (e.g., new project management routines or different evaluative tools for portfolios). Some scholars even suggest that traditional PM may suppress radical innovation. Our study takes a different approach. It aims to bridge radical innovation and network performance management through a systematic review of the literature. Here, we adopt a hybrid approach that combines bibliometrics with content analysis. Whereas the literature often separates the issues of network performance management and radical innovation, our contribution expands the theory of network management and radical innovation by developing a conceptual framework based on these concepts, thus combining them. We also offer suggestions for further research on this approach. Our framework suggests that overall, the performance management of radical innovation networks presents different features (e.g., recursive rather than linear) and constructs (e.g., openness and unintended performance) from those of innovation network management.     

Distributed Control Strategy with Smith's Predictor in a Pilot-Scale Diabatic Distillation Unit

Intrinsic characteristics of distillation such as dead time and high nonlinearities do not allow the complete elimination of transient times when any external disturbance or set-point change occurs. Thus, aiming at the use of easy-tuning systems, a distributed-action control in trays of a diabatic distillation unit with Smith's predictor was implemented in the Simulink environment to further reduce transient times and out-of-specification product. The distributed-action strategy with Smith's predictor led to a reduction of 33.3 min (33 %) in the transient time of the top temperature control loop and 66 % in out-of-specification product, when compared with the conventional strategy, and thus is shown to be an efficient approach to increasing the productivity of distillation plants.     

Short‐term effects in a reduced flow stretch: The case of the Antas River in South Brazil

The building of adduction channels (penstocks) that conduct water from reservoirs to turbines, which are located kilometres from the dam, is becoming common, optimizing the electricity generation in small dams. This design creates a river stretch with reduced discharge between the dam and the powerhouse. This study evaluates the short‐term impacts of the below‐dam decrease in river flow on fish assemblages. Samples were collected in the reduced flow stretch of the Castro Alves Hydropower Plant (Antas River, Rio Grande do Sul, Brazil) before the reservoir started operating (January 2008; mean discharge of 103.7 m³/s) and immediately after operation began (March 2008; mean discharge of 12.4 m³/s). Sampling was conducted in distinct habitats of the reduced flow stretch (slow waters—gillnets, sand beaches—seining nets, structured littoral—electrofishing, and fast waters—cast nets) with a strongly standardized effort. The attributes of the fish assemblages were not negatively affected by the flow reduction in any habitat sampled. However, distinct changes in the spatial structure were observed considering the different types of habitat predominantly used by the species, which represents an entire reorganization of the fish assemblages in the short term. It is fundamental that these short‐term aspects be considered in the licensing of hydropower plants in addition to the long‐term changes.